Pressebilder / Filme des Dürr-Konzerns
Nutzungsbedingungen für Pressebilder des Dürr-Konzerns
Alle Bilder sind urheberrechtlich geschützt. Inhaber sämtlicher Nutzungsrechte ist die Dürr AG.
Die Bilder dürfen bei unveränderter Darstellung ausschließlich für Zwecke der redaktionellen Berichterstattung, nicht jedoch für kommerzielle Zwecke, etwa für Werbung/Marketing und Handel genutzt werden. Der Veröffentlichung ist der Hinweis „Bildquelle: Dürr“ beizufügen.
Sollten Sie Fragen zur Nutzung der Bilder haben, wenden Sie sich bitte an Carmen Reichert.
Wird eine Nutzung zu anderen Zwecken als zur Berichterstattung oder eine Veränderung unserer Bilder gewünscht, ist vorab eine Einwilligung einzuholen.
Bilder Downloads
The Ecopure® CCF concept is a combined technology for dedusting, desulphurisation and denitrification through the use of Catalysed Candle Filter (CCF) filter cartridges. These enable the simultaneous cleaning of dusts, heavy metals, sulfur oxides and nitrogen oxides in one system.
The Ecopure® CRC concentrator is a continuous adsorption process with downstream thermal or catalytic oxidation stage. With regard to the cost/benefit ratio, it is particularly advantageous for treating large volume flow rates combined with low pollutant burdens that would be uneconomical to treat directly.
Dürr has developed a highly efficient adapter for filling air conditioning systems. Not only does it operate at a much higher filling speed, but it also reduces the amount of refrigerant remaining in the adapter after the filling process by up to 80%. As a result a much smaller amount of hydrocarbon-bearing material needs to be used. This helps to cut material costs - and on top of this reduces emissions to the environment.
Schenck has a solution for every (balancing) challenge - whether in the repair workshop or in mass production facilities. Our balancing systems cover the whole application spectrum from miniature motors weighing just a few grams right through to steam turbine blades weighing 400 tons.
Regenerative thermal oxidizers use less primary energy compared to conventional air pollution control systems. This is achieved through the use of regenerative heat exchangers, which are highly efficient at using the energy contained in the hot exhaust gases to preheat the exhaust air to be treated.
With its wheel alignment stand, x-wheel truck d, Dürr Assembly Products has set new standards in the measurement and alignment of the wheel geometry for trucks and buses with axle loads of up to 10 tons. Well-known manufacturers such as Volvo, DAF, Paccar, Renault and Mercedes-Benz benefit from the great advantages of this test stand in terms of quality, flexibility and cycle times. Based on the principle of non-contact x-3Dprofile measuring technology, which is unique in the world, it covers the high variance with regard to number and position of the axles in an automated process and dispenses with the need for adaptive measuring devices on tires and frames.
Wheel alignment measurement and adjustment with maximum precision – the Dürr Assembly Products x-wheel alignment stand makes it possible. The two non-contact x-contour measuring systems and the innovative three-dimensional x-3Dprofile measuring system offer measuring technology with maximum accuracy and repeatability. Together with the x-tronic balancer for steering wheels, they ensure precise wheel alignment with horizontal steering wheel position when driving straight ahead.
Filme
Filmmaterial
Sie sind interessiert an Filmmaterial? Dann sehen Sie sich die Filme auf unserem YouTube-Kanal an und sagen Sie uns, woran Sie interessiert sind.
Carmen Reichert
Officer Press Pictures
Corporate Communications & Investor Relations
- Telefon +49 7142 78-1168
- E-Mail carmen.reichert@durr.com
Dürr Aktiengesellschaft
Carl-Benz-Str. 34
74321 Bietigheim-Bissingen
Deutschland
Carl-Benz-Str. 34
74321 Bietigheim-Bissingen
Deutschland